DECORATIVE COATING

Recommendation & Method of use: It is to be added in water based paints before addition of extenders. Approximately 200 gms, of it has to be used in 100kgs of final product.

Recommendation & Method of use: For Universal Stainers 10 to 20% is recommended. For other Applications the right quantity can be determined by experiments.

Recommendation & Method of use: 0.5% wt./total TiO2 to be added at the time of grinding. Please note that no other wetting agents like soyalescithin, zinc octoate, etc. are to be used with it.

Recommendation & Method of use: For Black Paint: 10 to 20% of pigment by weight is recommended. For other Applications the right quantity can be determined by experiments.

Recommendation & Method of use: In solvent based Enamel: 2 to 3% of pigment by weight is recommended. For other Applications the right quantity can be determined by experiments.

Recommendation & Method of use: Universal Stainer 3 to 5%. We recommend to ascertain the right quantity of MARK DC 1080 addition by conducting necessary experiments at user's end.

Recommendation & Method of use: MARK IC 2059 should be added to the resin mixture prior to homogenization and the addition of the fillers/pigments.

Recommendation & Method of use: Step 1) Take 100 Ltrs. of paint made as per your regular formulation Step 2) Add 100 gms. of MARK DC1110 under high speed stirring Step 3) Add 10 Ltrs. soft water for Enamel and 20 Ltrs. for primers at the rate of 2 Ltrs./min. under high speed stirring.

Recommendation & Method of use: Step 1) Take 100 Ltrs. of paint made as per your regular formulation Step 2) Add 100 gms. of MARK DC1120 under high speed stirring Step 3) Add 10 Ltrs. soft water for Enamel and 20 Ltrs. for primers at the rate of 2 Ltrs./min. under high speed stirring.

Recommendation & Method of use: Step 1) Take 100 Kgs. of Alkyd of 50% solids under high speed stirrer Step 2) Add 200 Gms. of MARK DC 1111 under high speed stirring Step 3) Add 100 Kgs. Water (equal to resin solids) under stirring (higher the speed, faster the water addition)

Recommendation & Method of use: 0.5% MARK DC1210 is to be added in primers at grinding stage only for better results.

Recommendation & Method of use: 1) Follow the regular formulation & pricedure of manufacture of paint. 2) Add 0.2 to 0.5% MARK DC1220 in 100 Ltrs. of paint batch at grinding stage only for better results.

Recommendation & Method of use: 1) 0.5% MARK IC 2240 is to be added in formulation for anti-settling properties. 2) 2% MARK IC 2240 is to be added in formulation for anti-sagging properties.

Recommendation & Method of use: DOSAGE FOR PRIMERS:- 0.2% DOSAGE FOR ENAMELS CONTAINING HEAVY PIGMENTS (LEAD, CHROMES, ETC):- 0.1%.

Recommendation & Method of use: MARK I 4440 is recommended for Ink formulations where air-entrainment causes operational difficulties or impair the quality of Ink performance. 0.25 to 0.5% of defoamer on the weight of the inks is usually sufficient to suppress air-entrapment.

MARK I 4450 is recommended for formulations where air-entrainment cause operational difficulties or impairs the quality of the product. It has also very rapid foam knock-down properties. From 0.25 to 0.5% of defoamer on the weight of the coating solids is usually sufficient to suppress air-entrainment. The optimum amount for individual formulations can readily be determined by trial. For adhesives, 1 to 2% of MARK DC 1450 based on the weight of the latex solids is more than sufficient. As the product is very effective antifoam agent, a very small quantity like 200 gms to 500 gms can effectively defoam 100 Ltrs of paint. It is advisable to split the addition of defoamer by adding half the normal quantity to the pigment mix prior to grinding to suppress the formation of foam & the balance to the let down portion of the paint.``

Recommendation & Method of use: All we have to do is to prepare standard water based paint/plastic emulsion as under: 1) Take only soft water. 2) Add 2% MARK DC 1510 3) Take Pigments of your choice. 4) Add extenders. 5) Add thickener of your choice like HEC & Ammonium polyacrylate. 6) Add acrylic emulsion. 7) Add Biocide of your choice both in-can & film preservatives. 8) Add liquor ammonia or Mark DC 1820 to adjust pH(green option) 9) Optional - Add Coalescing agent, Gloss improver, water repellent, UV-absorber if desired.

Recommendation & Method of use: All we have to do is to prepare standard water based paint/plastic emulsion as under: 1) Take only soft water. 2) Add 2% MARK DC 1520 3) Take Titanium Dioxide Rutile. 4) Add extenders. 5) Add thickener of your choice like CMC & Ammonium polyacrylate. 6) Add acrylic emulsion. 7) Add Biocide of your choice both in-can & film preservatives. 8) Add liquor ammonia to adjust pH.

Recommendation & Method of use: All we have to do is to prepare standard water based paint/plastic emulsion as under: 1) Take only soft water. 2) Add 2% MARK DC 1530 3) Take Titanium Dioxide Rutile. 4) Add extenders. 5) Add thickener of your choice like HEC & Ammonium polyacrylate. 6) Add acrylic emulsion. 7) Add Biocide of your choice both in-can & film preservatives. 8) Add liquor ammonia to adjust pH. 9) Optional - Add Coalescing agent, Gloss improver, water repellent, UV-absorber if desired.

Recommendation & Method of use: 1) 0.1-0.2% Concentration on batch size. 2) Preferably at end stage. 3) Dosages need optimization (Caution: An overdose can lead to recoating problems)

Recommendation & Method of use: 1) 0.1-0.2% Concentration on batch size. 2) Preferably after pigment addition. 3) Dosages need optimization

Recommendation & Method of use: 0.1-0.2% Concentration on batch size. Preferably in thinning down process in Alkyd/CNSL systems.. Dosage need optimization.

Recommendation & Method of use: 1) 0.2-0.3% Concentration on batch size. 2) Preferably at end stage. dosages need optimization