INDUSTRIAL COATING

Recommendation & Method of use: For Black industrial coating: Addition of MARK IC 2050 @ 10% of pigment by weight in mill base during grinding is recommended. For other Applications the right quantity can be determined by experiments.

Recommendation & Method of use: MARK IC 2051 should be added to the resin mixture prior to homogenization and the addition of the fillers/pigments. For other Applications the right quantity can be determined by experiments.

Recommendation & Method of use: MARK IC 2052 is particularly recommended for epoxy resins systems, UV systems, PVC plastisols, Adhesives & Sealants. For other Applications the right quantity can be determined by experiments.

Recommendation & Method of use: Inorganic pigments: 0.5-3 % Organic pigments: 2.5-5 % For optimal performance MARK IC 2053 should be incorporated before solids are added. For other Applications the right quantity can be determined by experiments.

Recommendation & Method of use: Inorganic pigments: 0.5-3 % Organic pigments: 2.5-5 % For optimal performance MARK IC 2054 should be incorporated before solids are added. For other Applications the right quantity can be determined by experiments.

Recommendation & Method of use: Inorganic pigments: 3.0 - 5.0% Organic pigments: 10 - 20% MARK IC 2055 should be added to the resin mixture prior to homogenization and the addition of the fillers/pigments. For other Applications the right quantity can be determined by experiments.

Recommendation & Method of use: MARK IC 2057 is particularly recommended for epoxy resins systems, UV systems, PVC plastisols, Adhesives & Sealants. 10 - 20% based on organic pigments 3.0 - 5.0% based on other inorganic pigments For other Applications the right quantity can be determined by experiments.

Recommendation & Method of use: Especially recommended for unsaturated polyester resins. 0.5-1.5 % additive (as supplied) based upon fillers. For other Applications the right quantity can be determined by experiments.

Recommendation & Method of use: Especially recommended for unsaturated polyester resins. 0.5-1.5 % additive (as supplied) based upon fillers. For other Applications the right quantity can be determined by experiments.

Recommendation & Method of use: Especially recommended for unsaturated polyester resins. 0.5-1.5 % additive (as supplied) based upon fillers. For other Applications the right quantity can be determined by experiments.

Recommendation & Method of use: Inorganic pigments: 5-10 % Titanium dioxides: 2-4 % MARK IC 2072 should be added to the resin mixture prior to homogenization and the addition of the pigments. For other Applications the right quantity can be determined by experiments.

Recommendation & Method of use: MARK IC 2073 is particularly recommended for epoxy resins systems, UV systems, PVC plastisols, Adhesives & Sealants. 0.5-1 % additive (as supplied) based upon fillers for wetting and dispersion. 0.25-1 % additive (as supplied) based upon resin for stabilizing the viscosity. For other Applications the right quantity can be determined by experiments.

Recommendation & Method of use: It is ideally suited for stabilizing carbon blacks as well as organic pigments, especially in two-pack PU wood and furniture coatings. Amount of additive (as supplied) on pigment: Inorganic pigments: 8 - 10% Organic pigments: 10 - 15% Carbon Black: 12 – 18%

Recommendation & Method of use: The phenomenon of settling mostly depends upon the nature of pigments, weight of pigments and also the extenders which are incorporated in the formulations. It is always advantageous to determine the optimum level of MARK IC 2310 for particular formulation by taking trials. • DOSAGE FOR industrial coatings: 0.3 to 1%.

Recommendation & Method of use: MARK IC 2451 is recommended for formulations where air-entrainment cause operational difficulties or impairs the quality of the product. For fiber reinforced spray-up and hand lay-up resins, adhesives and cobalt-accelerated putty compounds, from 0.25 to 0.5% of defoamer on the weight of the solids is usually sufficient to suppress air-entrainment.

Recommendation & Method of use: MARK IC 2470 is recommended for formulations where air-entrainment cause operational difficulties or impairs the quality of the product.

Recommendation & Method of use: MARK IC 2460 is recommended for formulations where air-entrainment cause operational difficulties or impairs the quality of the product.

Recommendation & Method of use: 1. 0.1- 0.5% Concentration on batch size. 2. Preferably at end stage. 3. Dosages need optimization (Caution: An overdose can lead to recoating problems)

Recommendation & Method of use: 1) 0.3-0.8% Concentration on batch size. 2) Preferably at end stage. 3) Dosages need optimization.

Recommendation & Method of use: 0.2-2 % additive based on the total formulation, depending on the polarity of the system.

Recommendation & Method of use: • 0.1-0.2% Concentration on batch size. • Preferably in thinning down process. • Dosages need optimization.

Recommendation & Method of use: 0.5% MARK DC1210 is to be added in primers at grinding stage only for better results.

Recommendation & Method of use: 1) 0.5% MARK IC 2240 is to be added in formulation for anti-settling properties. 2) 2% MARK IC 2240 is to be added in formulation for anti-sagging properties.